Terra 360 CC | Terra 360 CJ | |
Connector | ||
Charging standard | Mode 4 | |
Number of outputs | 2 | |
Number of EV served | Up to two EV in parallel | |
Output combinations | Cable with connector CCS 2 | Cable with connector CCS 2 Cable with connector CHAdeMO |
Cable type | Air cooled | |
Cable Length | Standard: 4.7 m | |
Efficiency | > 95% at nominal output power | |
DC output | ||
DC output power | 360 kW (peak) | 360 kW (peak) |
DC output voltage | CCS 150 - 920 VDC | CCS 150 - 920 VDC CHAdeMO 150 - 500 VDC |
DC output current | Nominal 300 A DC / Peak 500 A DC | CCS: Nominal 300 A DC / Peak 500 A DC CHAdeMO: Nominal 200 A |
AC intput | ||
Input connection | 3 Phases + PE | |
Input voltage | 400 V AC +/- 10% (50 Hz) | |
Input frequency | 50 Hz | |
Input Current | 560 A | |
Input power | 390 KVA | |
Power Factor | > 0.96 ( at full load) | |
Harmonic Distortion (THDi) | 4.5% at full output power | |
Earthing systems | TN-S, TN-C, TN-C-S, TT (with upstream RCD) | |
Standby power | 80 W, excluding the heater | |
Overvoltage category (1) | Type III | |
Protection | Overcurrent, overvoltage, undervoltage, ground fault including DC leakage protection, overtemperature, integrated surge protection | |
Short circuit current | 25 kA | |
Mechanical | ||
Dimensions (H x W x D) | 2215 x 1210 x 764 mm | |
Mounting Type | Floor mounted | |
Weigth | 848 kg | |
Enclosure type | Stainless steel 430 and Aluminium | |
IK rating (2) | IK10 (HMI: IK08) | |
Environmental | ||
IP rating | IP54 | |
Enclosure Type | Indoor and outdoor | |
Maximum operating altitude | Up to 2000 m | |
Temperature range | -35 °C to +55 °C (de-rating characteristic applies from 40 °C) | |
Operating humidity | 20-95 % Rh non-condensing | |
Noise level | <75 dB(A) at 1m distance @ 25 °C on front door, at full power | |
Interface | ||
Screen Type | 15" LCD high-contrast touchscreen | |
Languages | Standard Language English ( Others available via Software upgrade) | |
Cellular communication | GSM / 4G / LTE | |
Communication Protocol | Open Charger Point Protocol (OCPP) 1.6 (and previous versions) | |
Authentication methods | RFID ( Standards, Cards..), On-screen PIN code authorization Option: payment terminal; Prepared for ISO 15118 - 2 PnC | |
RFID system | ISO 14443 A+ B to part 4 and ISO/IEC 15693 Others available on request (NFC, Calypso, Ultralight, PayPass, HID; and more) |
|
Energy metering | Ready for Eichrecht/PTB compliancy for AC and DC outlets | |
Standards and certification | ||
Declaration of Conformity | CE | |
Low voltage Directive | EN 61851-1:2011, EN 61851-23:2014, EN 61851-1:2010, IEC 61851-1:2010. IEC 61851-23:2014, EN IEC 62311:2020 | |
EMC | EN IEC 61000-6-1: 2019, EN 61000-6-4:2007+A1, IEC 61851-21-2_2021, EN 301489-1 v1.9.2, EN 301489-34 V1.4.1 | |
RED | EN 300330 V2.1.1:2017, EN 301908-13 V13.1.1.2019, EN 301489-1 V2.2.3:2019, EN 50364:2010, EN 301489-3 V2.1.2:2021, EN 301489-52 V1.1.2:2020, EN IEC 62311:2020, EN 301908-2 V13.1.1:2020 |
|
Additional compliance with standards | IEC 62196-2, IEC 62196-3, CHAdeMO 1.2 |